郵便機器 Architectural Mailboxes MB981 SeriesのPDF 取付方法をオンラインで閲覧またはダウンロードできます。Architectural Mailboxes MB981 Series 2 ページ。 Post mount mailbox

ページを印刷する

Hardware

Mailbox mounting hardware is included with all new Architectural

Mailboxes posts and 4x4 wood-post adapters. If you are using an

existing post, not made by Architectural Mailboxes, please reference

the mounting hole diameter and pattern in Option 2 to determine

the hardware you will need for installation.

CUSTOMERS ARE REQUIRED TO CONTACT THE LOCAL

POST OFFICE BEFORE INSTALLING THE MAILBOX TO

ENSURE ITS CORRECT PLACEMENT AND HEIGHT AT

THE STREET. GENERALLY, MAILBOXES ARE INSTALLED

AT A HEIGHT OF 41–45 INCHES FROM THE ROAD

SURFACE TO EITHER THE INSIDE SURFACE OF THE

MAILBOX THAT THE MAIL IS PLACED ON BY THE

CARRIER OR TO THE LOWEST EDGE OF MAIL ENTRY

(FOR LOCKED MAIL SLOT DESIGNS) AND ARE SET

BACK 6–8 INCHES FROM THE FRONT FACE OF CURB

OR ROAD EDGE TO THE MAILBOX DOOR.

USPS LOCK STATEMENT: IT IS IMPORTANT TO NOTE

THAT IT IS NOT THE RESPONSIBILITY OF MAIL

CARRIERS TO OPEN MAILBOXES THAT ARE LOCKED,

ACCEPT KEYS FOR THIS PURPOSE, OR LOCK

MAILBOXES AFTER DELIVERY OF THE MAIL.

Questions, Comments, Concerns?

www.architecturalmailboxes.com

[email protected]

MAIL ENTRY

41" to 45"

6" to 8"

CURB

ROAD SURFACE

Post Mount Mailbox | MB981 Series

MOUNTING INSTRUCTIONS

Tools

(not included)

One Phillips Screwdriver

Option 1

For use with compatible

Architectural Mailboxes

posts and adapters...

Align the mailbox mounting holes

with the holes in the mounting plate.

Attach the mailbox to the mounting

plate using the hardware included

with the Architectural Mailboxes

post or adapter.

Option 2

For use with non-Architectural Mailboxes posts...

Identify if your existing post or

mounting surface has a matching

hole pattern with the mailbox. If

there are no matching hole

patterns, you will need an adapter

plate or piece of wood to drill the

mounting holes into. Architectural

Mailboxes does not recommend

drilling new holes in the mailbox, as

that will expose untreated metal

and void the product warranty.

Use the drawings below for

suggested bolt sizes to use with

your mailbox.

One Wrench

- or -

Fits #10 Bolts

7.00"

10.00"

3.25"

4.00"

Find us on social media!

@archmailboxes

Rev. E