- ページ 8

アンプ ARCHITETTURA SONORA ASH3EVOのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ARCHITETTURA SONORA ASH3EVO 14 ページ。

Multi-room / multi-source Con guration >

Stereo

Music

source

5.1 Surround Con guration >

5.1 Processor

Music Source

8. Operation

After completion of installation and wiring, as described in the previous paragraphs, switch the ampli er ON by actuating the rear mains switch (N).

"STATUS" power LED (D) indicates the status of the ampli er: green everything is OK, yellow if the ampli er is in "MUTE", red if one or more

of the ampli er modules is off or defective.

"STAND-BY" power LED (C) indicates the status of the POWER command (E): green the ampli er is enabled (ACTIVE), yellow if it is disabled

(MUTE)

Pressing the POWER button switches from the MUTE (ampli er disabled) to the ACTIVE state (ampli er enabled)

The rear P/H switch (I) determines the status of the ampli er when turned on. It has two positions: P (Pro) and H (Home)

Room 1 > Music A

Room 2 > Music B

Sub

STAND-BY

POWER

STATUS

AS - MULTI-CHANNEL POWER AMPLIFIER

central