- ページ 6

アンプ Creek Audio EVOLUTION 50AのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Creek Audio EVOLUTION 50A 8 ページ。 Integrated amplifier
Creek Audio EVOLUTION 50A にも：取扱説明書 (13 ページ), 取扱説明書 (17 ページ)

ページを印刷する

TIME

If you are tuned to an FM station with RDS, it will normally transmit the real time. The default RDS

info shown in the screen does not include TIME. To show time on the display from the front panel

controls, press INFO once. From the Remote control handset, press TIME or INFO buttons once.

Note: if the FM signal is not strong enough to show RDS data, TIME cannot be displayed.

INFO, operates in Tuner mode to display the different pages of information available from the tuner

and RDS data. To display the different pages, it is necessary to toggle the INFO button several times

to call-up: Pre-Set number, Frequency, Tuner metrics, (PS, RT, CT, see DISPLAY for details)

STEREO/MONO

RUBY automatically adjusts the Left/Right separation to maintain good signal to noise ratio. If the

signal strength is not high enough, Stereo will blend proportionally into MONO. The infinity symbol

∞

will be displayed when full stereo operation is in operation. MONO operation will display

instead.

OPERATION FROM THE EVO REMOTE CONTROL

TUNER. Press the green TUNER button to switch to tuner. Green buttons on the remote are

exclusively for Tuner functions, but many others are also functional without having to press the

green TUNER button first. Here is a list of remote operation buttons:

LEVEL is not operational in this model.

BAND has no function as the RUBY is FM only.

MODE switches between PREset mode and TUNE mode.

MONO manually forces the FM tuner into mono in three stages, for when an FM stereo signal may

be too noisy to listen in Stereo. The RUBY Tuner will automatically adjust the amount of stereo

separation, from full stereo to mono, to maintain a good signal to noise.

DIM changes between three levels of display brightness. Display off is not possible.

NUMBERIC buttons 0-9

1. To tuner directly to a frequency.

2. To go directly to a Pre-set address

Numeric frequency entry:

numbers, without a decimal point, i.e. to tune to 101.1 MHz FM, enter 1011, or to tune to 909 kHz

Page 6

Green buttons

Other colour buttons

To enter a known station frequency directly, press the exact