ページを印刷する2.4
Barometer
To select on the multifunction display the barometer reading press the
key
or
. In case of small errors is possible to calibrate the
barometer editing the parameter n.9
submenu.
Warning!!! The wrong use of this function makes the
measurements of the barometer and altimeters less accurate.
2.5
Thermometer
To select on the multifunction display the thermometer reading press
the
or
key.
2.6
Time/Chrono
To select on the multifunction display the Time (clock) or the Chrono
(chronometer) press the
when displayed, press with long pressure the
To adjust the Date and Time modify following parameters n.10
(hour), n.11
min
year
(year), in the
2.7
Batteries Voltmeter
In order to set the multifunction display to show the battery voltmeter
press the keys
Warning ! The Vl100 instrument turns off when the battery level falls
below 1.9 Volts.
2.8
Batteries Level
The batteries level is continually monitored and is displayed on the
fourth digital display. The level is displayed as a percentage from 0 to
90 in 10% steps (for example "b
80% of the full level.)
or
(minutes), n.12
setup
submenu.
or
(example "
Page 6
kbar
(in 0.1 mB steps) in
key. In order to reset the Chrono,
day
(day), n.13
" means 2.8 Volts )
V 2.8
" indicates that the batteries are at
80
key.
mont
(month), n.14
setup
hour