- ページ 10
サウンドカード Digigram LX6464ESeのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Digigram LX6464ESe 15 ページ。 Ethersound pci express sound cards
Digigram LX6464ESe にも： ユーザーマニュアル (14 ページ)
ページを印刷する
HOW TO CHECK THE INSTALLATION
Once the driver and card are installed according to the procedure described in this manual, you can verify that the
card works correctly as follows.
Digigram Control Center
The Digigram Control Center panel can be started from the menu <Start><Programs><Digigram>.
The "General Information" tab displays all the Digigram driver packages installed on the computer, with their
version.
The LXES tab displays the LX cards installed in the computer: card type, serial number, MAC address, firmware
version
"General information" tab
The card is listed in the LXES tab.
This means that the driver is correctly installed and that it has found the card.
You can now check the presence of the DirectSound devices and ASIO devices.
The LX card is not listed in the LXES tab.
●
Please check from the Windows Device Manager if the card is detected by the operating system.
●
Right click on the icon "My computer" (from the Desktop, or from the Windows browser).
●
Select "Manage", and "Device Manager".
●
The LX card should be listed in the "Sound, video and game controler" section.
●
If there is an exclamation mark in front of the card, this means that the driver is not installed correctly.
Remove the LX Kit driver from the Windows Control Panel, Add/Remove programs, and install it again.
●
If it is not listed, check in the "Other devices" section of the "device Manager".
The card is not listed at all in the "Device Manager", proceed as follows:
●
Shut down the computer and remove the LX card.
Please be careful with electrostatic discharge when handling the card (read section "Information for the
user" of this document for more information).
●
Make sure the golden tracks of the LX card's PCI Express interface are clean; if not, you may use a dry rag
to clean them.
LX1616ESe / LX6464ESe
User manual
"LXES" tab