- ページ 10

サウンドカード Digigram LX6464ESeのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Digigram LX6464ESe 14 ページ。 Ethersound pci express sound cards
Digigram LX6464ESe にも：ユーザーマニュアル (15 ページ)

ページを印刷する

LX6464ESe & LX1616ESe user guide

7 DirectSound mixer panel

The card does not dispose of digital gain. Under the Windows 'Volume' control panel only a 'Mute' is available.

8 Asio control panel

To use the card through an ASIO based application, make sure the A SIO driver option has been checked during

the installation, as described above. The ASIO driver parameters can be configured from the "ASIO ES Settings"

panel, available from < Start> , < Programs> , < Digigram> , < Digigram ASIO ES Settings> .

It can also be launched directly from the ASIO software applications, as most of them feature a "Preferences" or

equivalent menu allowing to configure the ASIO devices to be used.

Buffer size

The buffer size determines the size in samples per buffer used by the Asio driver to transfer audio data from/to

the board's Input/Output. The lower the buffer size, the lower the latency.

The range of the buffer size settings depends on the stream granularity defined in the Digigram Control Center.

You can access this parameter by clicking on the " C hange DSP granularity" button.

Note that, audio dropouts may be experienced when using very small buffer size.

It is possible to check if audio dropouts are experienced. First of all start the ASIO based application. Allocate the

ASIO channels in this application. Open this ASIO control panel, and click on the " T est " button.