- ページ 16
フォグマシン Ayra WSM Black 02のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ayra WSM Black 02 18 ページ。 Dmx fog machine

puffs of smoke when it
has not been
commanded to do so
The DMX signal
appears to be
interrupted and some
devices are flashing or
behaving strangely
Fluid sprays out of
smoke machine output
nozzle
The wireless remote
control does not work
The information in this user manual is subject to change at any time without notice.
Version: 1.0
Date of creation and author's initials: 29-07-2017 RV
Machine is warming up
Damaged/defective cables
Power interference on the
DMX signal
DMX terminator is missing
Signal loss or interference in
the DMX circle
Incorrect type of fluid
Heating element or thermal
component is not functioning
Receiver is not plugged in
Remote control battery is
empty
Smoke machine is out of
range
will produce small puffs of smoke as it is cooling
down.
Once the machine has been switched on, it will
produce small puffs of smoke as it is warming up.
Check and replace the DMX cables if necessary.
Avoid connecting signal cables parallel to power
cables.
Close the DMX circle with a DMX terminator.
Close the DMX circle with a terminator or connect
a booster after maximum 32 fixtures.
Make sure you are using the correct type of
smoke fluid for this machine. Other fluid types
may produce spatters.
If the heating element or other internal component
is not functioning (properly), this can cause the
output nozzle to spray fluid. If you are unsure
whether the machine is functioning properly,
switch it off completely and contact your dealer
for information and/or advice.
Make sure the wireless remote control receiver is
connected correctly.
If the battery of the remote control is empty, be
sure to replace it with one of the same
model/type.
If the distance between the remote and receiver is
too great, the remote will not work. Try controlling
the machine with the remote from a closer
distance, if possible, ensure the path between the
receiver and the transmitter is unobstructed, and
make sure the antenna is fully extended.
Revision date and author's initials: -