- ページ 12
コーヒーメーカー Cremesso SMART BRAVAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cremesso SMART BRAVA 20 ページ。
ページを印刷する
Low water indicator
The water tank is equipped with a
low water indicator.
If the water tank is empty, the
cleaning key lights up blue.
Programming the coffee quantity
The output quantities can be
adjusted for each coffee key.
The default settings are:
Espresso: 50 ml
Lungo: 110 ml
Lungo Grande: 200 ml
The programmable output quantity
is 30–250 ml.
Place a cup under the output.
X
Check the level of the water tank.
X
Fill with water, if required.
Load capsule.
X
Hold down the key to be
X
programmed (e.g. Espresso
) for at least 3 seconds, until it
flashes rapidly three times.
Release the key.
X
Coffee output starts.
12
When your cup is full enough:
X
Press the key to be programmed
(e.g. espresso
) again.
Coffee output stops.
All keys light up.
The new programmable quantity
setting is applied.
If the water tank empties during
programming:
Repeat the programming with a
X
full water tank.
Programming reset
Pull out the power plug.
X
Hold down the cleaning key
X
and re-insert power plug.
Release the key.
X
Cleaning key flashes rapidly three
times. The default settings are
restored.