- ページ 13

アクセサリー DigiGrid MGOのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DigiGrid MGO 19 ページ。
DigiGrid MGO にも：ユーザーマニュアル (15 ページ)

The first time you launch SoundGrid Studio, the Wizard will open. It scans the network, inventories its assets, and then configures the

devices. If the Wizard does not start automatically, click the Start Auto Config button, which is next to the Network Port.

Choose "NEXT" to start automatic configuration. This will take a few moments. Choose "CANCEL" to configure manually.

If the Wizard cannot locate the requested SoundGrid network devices, this means the devices

might be off or not connected properly. In such a case the Wizard will allow you to rescan the

network or work as a Driver node slaved to another system. For more information please refer

the SoundGrid Studio User Guide.

When configuration is complete, close the window. If there is still a problem, you can

configure your system manually. Use the System Inventory page to assign devices, control

the network, and manage clock. To learn how to use this page, please refer to the user guides

for SoundGrid Studio and StudioRack.

SoundGrid Studio uses Ethernet to stream audio between devices on a SoundGrid

network. Synchronization clock is also carried over Ethernet—a method called Sync

over Ethernet (SoE). SoundGrid I/O devices can clock by other means as well, but SoE is

by far the most common (and convenient) way to provide clock information to network

devices. The first device added to a rack is designated as the SoE clock master and is

placed in the first rack slot.