- ページ 3

ポータブル・マルチメディア・プレーヤー Archos GminiTM 402のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Archos GminiTM 402 4 ページ。 Archos camcorder manual

ページを印刷する

PHOTO – Taking photos with your Gmini

2.1

Taking a photo

1. From the Main screen, select the Camera icon, then click on ENTER.

2. On this Viewﬁ nder screen, you can adjust the exposure settings by pressing the F2 button (Settings). You can

also zoom in and out using the up and down buttons. For more information on the F3 button (Fix), see the

section Controlling the image quality.

3. On the Settings screen, use the directional buttons UP and DOWN to select a setting, and LEFT and RIGHT to

change it. To change the ﬁ le name, select the Rename button and press enter. You will be taken to the Virtual

Keyboard (see the Using the Virtual Keyboard section in the Browser chapter of the complete Adobe

user manual for more information.) Press one of the Function buttons (Back) or ESC/STOP to go back the

Viewﬁ nder screen.

4. Once you have adjusted the settings, press the ENTER button to take a photo. You might notice that the HDD

indicator lights up as the device is saving the image on its hard drive. The name of the next image changes

and your Gmini

is now ready to take the next picture.

™

The table below explains the different settings. The corresponding screen icons are also shown.

Photo settings

Resolution

Options: VGA or 1.2 Megapixels. 1.2 Megapixels (1280 x 960) will give the best image

quality, but the largest ﬁ le size. VGA (640 x 480) will give the smallest ﬁ le size, but the

images will not be as sharp.

Image quality

Basic, Normal, Fine. For the best possible image (although it will take up more disk

space) set this to Fine (ﬁ ne dots icon).

Exposure

Between Brighter +2, Normal and Darker -2. This permits you to adjust to bright or

dark conditions. Setting it in the negatives, will decrease the amount of picture exposure

and make your image darker. Setting it positive will increase the exposure and make

your image brighter. If your subject has a bright background, you may want to over

expose your image a little bit so that the person's face is more visible, thus you would set

it to Brighter +1 or +2. If you are taking a photo where there is a lot of snow or the sun's

reﬂ ection on water, you may want to reduce the exposure, thus set it to Darker -1 or -2.

White balance

Options: Auto, Daylight, Cloudy, Fluorescent or Tungsten. This parameter lets the

camera adjust to the ambient light source in order to record colors in the best way.

Timer

Options: Off, 5 seconds or 10 seconds. The timer setting allows you to delay the moment

at which the photo is taken, for example if you want to include yourself in the picture.

Reset

Reset the values in this screen to the factory default settings.

2.2 Taking a photo using the timer

On the main screen, select the Camera icon and press enter. Press the F2 buttons (Settings) and highlight the

Timer setting. Select for example 10 seconds. Press a Function button (Back) to return to the Viewﬁ nder screen.

The Timer icon appears on the top of the Viewﬁ nder screen. Now press ENTER. A stopwatch symbol will appear

on the screen and counts down from 10 to 0. The Gmini

Note: The Timer function will stay active for successive pictures you take unless you return to the Main menu or

set the Timer Setting to OFF.

™

402 will now take a photo.

402 Camcorder

PDF