- ページ 5

業務用食品機器 Cres Cor H138NPSCLCMCQRLのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Cres Cor H138NPSCLCMCQRL 10 ページ。 Merchandising hot cabinets

5925 Heisley Road • Mentor, OH 44060-1833

DOOR ADJUSTMENT:

Door latches and hinges sometimes loosen and/or need

adjustment after a period of time. Gaps between the

door and the cabinet will cause heat loss.

Test the door to see if it closes properly:

a) Close the door onto part of a piece of paper and try

to pull it out.

b) Do this on the edges on the latch side and then on the

hinge side. If it pulls out without some resistance, the

latch and/or hinges need to be adjusted.

Loose Screws: If the screws are loosening, use liquid

thread lock (non-permanent) to keep them tight.

How to adjust/tighten door latch:

Fig. 1. For vertical adjustment

(Up and down movement):

a) Loosen two (2) screws located in magnetic strike

on cabinet.

b) Move strike up or down for alignment to magnet

on latch.

c) Tighten screws to secure.

Fig 2. For horizontal adjustment

(Greater or lesser magnetic draw):

a) Loosen four (4) screws in latch on door.

b) Move latch forward or backward to adjust

magnetic draw.

c) Tighten screws to secure and then test the door.

MAINTENANCE INSTRUCTIONS

FL-2371-LC

Holding Cabinet

Rev. 0 (3/13)

Page 5 of 10

Figure 1 Strike

Figure 2 Latch