- ページ 3
業務用食品機器 Cres Cor RO151033のPDF インストレーション、オペレーション、メンテナンスマニュアルをオンラインで閲覧またはダウンロードできます。Cres Cor RO151033 11 ページ。 8kw rethermalizers
ページを印刷する
5925 Heisley Road • Mentor, OH 44060-1833
VENTING YOUR CABINET:
1 . The purpose of ventilating hoods is to direct and
capture smoke, grease-laden vapors, heat, odors, or
fumes .
2 . Low temperature equipment (maximum temperature
250°F/121°C) does not produce heat, odors, fumes,
grease-laden vapors or smoke and is not required to be
vented .
HOW TO INSTALL CABINETS:
1 . Remove all packing material from inside and outside
of cabinet .
2 . Position cabinet on level floor; install the cabinet
interior (pan slides) if not already installed .
3 . Plug power cord into proper wall receptacle .
UNIT SPECIFICATIONS: Unit uses six (6) elements (1325 watts each) . Units are rated 8000 watts .
MODEL NOS.
RO151033
RO151034
PRESET TO A MAXIMUM OF 250°F. TEMPERATURE
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
INSTALLATION INSTRUCTIONS
ELECTRICAL SPECS
(AC SERVICE)
VOLTS
PHASES
HZ
208
1
60
CABINET MODEL RO151034 IS
3 . Most jurisdictions consider our low-temperature units
(maximum temperature is 350°F/177°C) as low-heat
appliances not requiring vent hoods .
4 . Installation must conform with local codes . The
authority having jurisdiction of enforcement of
the codes will have the responsibility for making
interpretations of the rules .
POWER SUPPLY REQUIREMENT
ELEC. LOAD
ALL 3 PHASE IS 3 WIRE + GROUND
AMPS
VOLTS
AMPS
39
208
50
FL-RO151033
Rethermalizer
Page 3 of 11
Rev. 3 (5/14)
PHASES
VOLTS
1
208
RECEPTACLE
6-50R