- ページ 14
録音機器 ArchWork ARCTABのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ArchWork ARCTAB 20 ページ。 Touch-sensitive dmx interface
ページを印刷する
4
1.3 OPERATING ELEMENTS AND CONNECTIONS
2
3
6
Front
7
8
9 10
Bottom
1. POWER ON/OFF - a blue LED is used to indicate
whether the unit is on or off (Blackout).
2. SCENES buttons (1-8) - are used to select
individual scenes. Scenes can be static or
dynamic. Double pressing buttons 1-8 will
reset the Dimmer, Speed and Color default.
3. A-B-C-D-E - used to cycle between 25 different
pages (A, B, C, D, E x5). In combination with
buttons 1-8, 200 different scenes can be
stored.
4. The select button allows you to cycle through
the Dimmer, Speed and Color fader controls.
The faders at the bottom of the unit is used to
select the intensity of the Dimmer, Speed and
Color settings.
5. The green LED indicates that the Dimmer,
Speed and Color settings on the STICK are set
ARCTAB
1
4
5
11
12
6. The colorized fader of the design offers a
7. RESET button
8. USB connection
9. POWER LED
10. SWITCH USB/EXT
11. SLOR mini SD
12. DATA LED
13. 2x10 PINS CONNECTOR
14. ETHERNET (RJ45)
15. DMX (1= ground, 2 = DMX -, 3 = DMX +)
16. POWER IN 9V DC 0.65 A
RS232TX
1
RS232RX
3
PORT 7
5
PORT 6
7
PORT 5
9
10
PORT 4
11
12
PORT 3
13
14
PORT 2
15
16
PORT 1
17
18
PORT 0
19
20
13
14
15
16
Rear
to default. If the fader is moved to the right or
left of the default (green), one of the 8 blue
LED's will indicate your current intensity level.
direct access to basic colors with a simple
tourch.
2
GND DMX
4
DMX1-
6
DMX1+
8
DMX2-
DMX2+
RELAY
3.3V
IR RX
GND
VIN
Fig.2