- ページ 7

オーブン Cres Cor 1000-CH-SS-SPLIT-DEのPDF インストレーション、オペレーション、メンテナンスマニュアルをオンラインで閲覧またはダウンロードできます。Cres Cor 1000-CH-SS-SPLIT-DE 13 ページ。 Cres cor radiant ovens

5925 Heisley Road • Mentor, OH 44060-1833

-DX OVENS, continued

RECIPES:

The -DX control can hold up to 18 saved recipes .

To save a recipe:

1 . Press the RECIPE button .

2 . Turn the knob through the menu until you get to "Edit"

and press the knob .

3 . Turn the knob to reach the recipe you want to edit .

There are 18 blank recipes to customize and save .

4 . Press the knob and enter the cook, hold and time values .

5 . After the entering the final value, "Edt" will show

again, allowing you to edit another recipe .

6 . Press the knob to edit more recipes or turn to "End"

to exit the menu .

To use one of the recipes:

1 . Push the RECIPE button .

2 . Turn the knob to the desired recipe; "rcP01", "rcP02",

"rcP03", etc .

3 . Push the set button to select and start the preset process .

Unit will begin to preheat .

4 . Run the cycle as described above by pressing START

button after oven has preheated .

Note: The display button will cycle through all the values

as before, but will include the recipe number, if

using a saved recipe .

Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com

OPERATING INSTRUCTIONS (continued)

Additional Menu Settings:

Press and hold both the TIME button and the knob for 5

seconds to get into the menu .

Here you can set the recipes, temperature units (°C or °F),

PUSH START reminder and the datalog settings

(USB connection required):

"RECE" allows you to enable or disable the data

record feature .

"RECF" allows you set how often (in minutes) a

datapoint will be recorded .

"RECD" allows you to set how long (in days) you would

like the data to be stored in memory .

FL-2374-D

Ovens

Rev. 3 (2/15)

Page 7 of 13