- ページ 3

錠前 Digilock NEXT Sola3 Touch RFIDのPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。Digilock NEXT Sola3 Touch RFID 6 ページ。 Key managed

Setup

Locks are shipped with factory default settings (only operates by pressing `). Each lock must be set up to operate with a Programming

Key and Manager Keys.

Insert the Programming Key.

A two-tone beep will be heard

and the LED will ﬂ ash.

Programming Instructions

Express Register Manager Keys

The Programming Key can quickly program multiple locks to operate with the same Manager Keys.

Go to a lock already programmed to operate with the Manager Keys.

Touch and hold

for 10 seconds (a two-tone beep will be heard after

5 seconds followed by 2 sets of two-tone beeps after 10 seconds)

then release.

The LED will ﬂash.

At each lock to be programmed, insert the Programming Key.

A two-tone beep will be heard and the LED will ﬂ ash once to indicate

successful registration.

*The Programming Key will continue to function in Express Registration mode until it is used to operate a lock.

Product Guide

While the LED is ﬂ ashing, insert

one Manager Key at a time.

A two-tone beep will be heard for

each Manager Key programmed.

Touch RFID

Key Managed

Shared Use Functionality

While the LED is ﬂ ashing, insert

the Programming Key.

A two-tone beep will be heard

and the LED will turn off.

While the LED is ﬂ ashing, insert the Programming Key.

A two-tone beep will be heard and the LED will turn off.

To end Express Registration mode:*

Go to any programmed lock.

Press

then insert the Programming Key.

Repeat above steps for each lock

or follow instructions to Express

all locks.