- ページ 4
キーパッド Digilock Numeris Versa MiniのPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。Digilock Numeris Versa Mini 11 ページ。 Touch rfid
Digilock Numeris Versa Mini にも: マニュアル (18 ページ), 製品マニュアル (11 ページ)
Programming Instructions
Set Lock Functionality
Each lock can be set for either shared or assigned use functionality. Press = to check functionality. If in shared use, LED is red. If in
assigned use, LED is green.
1
To set for assigned use:
Press
=` 65 `
.
The red LED will turn on.
Programming Instructions - In Shared Use Functionality
Auto Unlock
When in shared use functionality, each lock can be programmed to auto unlock after a set number of hours. The default setting is OFF
(does not auto unlock).
1a
To turn on Auto Unlock:
Press
=` 95 `
.
The LED will fl ash.
While the LED is fl ashing, insert the Programming Key.
A two-tone beep will be heard and the LED will turn on.
1
To turn off Auto Unlock:
Press
=` 94 `.
The LED will fl ash.
4
Product Guide
2
Insert the Programming Key.
A two-tone beep will be heard
and the green LED will fl ash once.
1b
Keypad
Shared & Assigned Use Functionality
1
To set for shared use:
Press
=` 56 `
.
The green LED will turn on.
2
While the LED is on, enter the number of hours from
then press
`
.
Two sets of two-tone beeps will be heard and the LED will turn off.
For example:
Press 8 ` to set the lock to auto unlock 8 hours after locking.
2
While the LED is fl ashing, insert the Programming Key.
A two-tone beep will be heard and the LED will turn off.
2
Insert the Programming Key.
A two-tone beep will be heard
and the red LED will fl ash once.
1 - 9 9