- ページ 10

サーモスタット Digimax 210のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Digimax 210 11 ページ。 Programmable thermostat compatible with maxi controller
Digimax 210 にも：ユーザーマニュアル (12 ページ)

ページを印刷する

5. Dial via the phone "99#", you will hear 3 short confirmation

beeps.

6. The setback differential is now applied to the comfort

setpoint.

Apply the comfort setting

1. Call the security console from a touch tone or mobile

phone.

2. The security console will answer your call with 3 short

beeps.

3. After these beeps, enter your PIN code via the phone (fac-

tory default 0000).

4. The console confirms a correct PIN code with 3 beeps (an

erratic PIN code is indicated by one long beep).

5. Dial via the phone 99*, you will hear 3 short confirmation

beeps.

6. The comfort setpoint is now applied.

e) To erase a registered thermostat

1. Set the security console mode switch to the THERM posi-

tion. All indicators of occupied zones come on.

2. Key in your PIN code (factory default 0000).

3. Press key number 8

4. Press ENTER

5. Enter the required thermostat (1 to 4, e.g. press 3 for

thermostat 3)

6. Press ENTER

7. Reset the mode switch to the RUN 1 or RUN 2: zone

indicators go out.

Page 10