補聴器 Digimax UP-6ESSのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Digimax UP-6ESS 2 ページ。
COMPLETE PARTS LISTING
Charging Case x 1
Hearing Aid x2 (Left / Right Unit)
Ear Cap (L, M,S, Tiny x 2)
AC Adapter
AA Battery x 1
Cleaning Brush x 1
HEARING AID FEATURES
Charging Case
AA Battery
Left Hearing Aid
(Blue Marking)
Cleaning Brush
Charging Status
Indicator
Status Button
Battery / AC Power
Indicator
Hearing Aid
Microphone: The Sound Collecting Portion
ON/OFF Switch
ON : Its 10-second
delay on function will
perfectly avoid having
feedback noise while
wearing it.
OFF: The power is off.
Battery Compartment
1
Remove the Hearing Aid
from the case.
3
Place the device in your ear.
Right Hearing Aid
(Red Marking)
AC Adapter Input
Charging Status
Indicator
※ Warning: It might cause further hearing damage at
Setting 1
Setting 2
Ear Cap:
Setting 3
Soft Silicon Ear Cap.
Four interchangeable
sizes are provided.
Setting 4
Setting 5
Volume Knob
OPERATING INSTRUCTIONS
2
Turn the power on and
rotate the Volume Knob to
the desired volume level.
4
Fit the Hearing Aid with
proper ear cap.
ADJUSTING THE VOLUME
The Volume Knob allows you
to adjust the volume.
Setting 1 is the lowest, while
setting 5 is the highest. Rotate
the knob to the desired volume
level.
inappropriate volume level.
Perfect for hearing loss
Audio Gain < 20dB
below 45dB
Perfect for hearing loss
Audio Gain < 40dB
below 65dB
Perfect for hearing loss
Audio Gain < 50dB
below 75dB
Perfect for hearing loss
Audio Gain < 55dB
below 95dB
Perfect for hearing loss
Audio Gain ≤ 55dB
below 105dB
CHARGING
※ Ensure that the switch must be in the ON position.
※ Place the Hearing Aids in the Charging Case for 8 hours at
least, no matter when the Charging Status
lit. Turn OFF the Hearing Aids when not in use for a long period
of time.
To recharge using AC adapter
1. Insert the AC adapter as shown. Please ensure the switch is ON
before charging.
2. When the Status Button is pressed, please ensure the Charging
Status Indicator
and the AC Power Indicator
The Hearing Aids are charging normally.
Charging Status
Indicator
Battery / AC Power
Indicator
To recharge using battery
1. Install AA battery into the battery compartment in the Charging
Case as shown. Please ensure the switch is ON before charging.
2. When the Status Button is pressed, please ensure the Charging
Status Indicator
and the AC Power Indicator
The Hearing Aids are charging normally.
Charging Status
Indicator
Battery / AC Power
Indicator
Indicator is not
are green.
Charging Status
Indicator
are green.
LOW
(OFF)
HIGH
Charging Status
Indicator