- ページ 2
フロアマシン Crescent SC6500のPDF トラブルシューティングマニュアルをオンラインで閲覧またはダウンロードできます。Crescent SC6500 2 ページ。
Crescent SC6500 にも： ユーザー・メンテナンス・マニュアル (2 ページ)
ページを印刷するATTENTION! Do not use the machine before you have read and understood the Instructions for use manual
The machine
doesn't work
as it should?
1 Check battery charge gauge.
The suction
doesn't work
as it should?
1 Check if the suction hose is
The machine
doesn't clean
as it should?
1 Check if you have the right water
The brushes
don't work as
they should?
1 Check if the brush are correctly in -
2 Check that the drive pedal is re -
2 Open the recovery tank and check
correctly installed and cleaned.
2 Check if the solution tap is open.
settings.
2 Check if there isn't any brush motor
stalled and not worn out.
3 Check battery cables are well con -
sponding and all circuit breakers are
armed.
3 Check if squeegee blades are
if the vacuum grid and gasket are
cleaned.
3 Check if the solution filter is
3 Check if there are external materials
overload i.e. 3 battery Ledsflash si -
multaneously.
4 Recovery tank seal cover must
nected together.
4 Close the recovery tank cover prop -
damaged or dirty.
cleaned.
avoiding brush rotating.
www.crescentindustrial.co.uk
SC6500
correctly installed and in good
condition.
erly and/or verify the gasket wear.