- ページ 6

ボート Cresent Kayaks Solo SkiffのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Cresent Kayaks Solo Skiff 9 ページ。

POWERING YOUR SOLO SKIFF

TRIM PIN - SEE MOTOR

OWNERS MANUAL FOR

DETAILS HOW TO

ADJUST MOTOR TRIM

ANGLE

CAVITATION PLATE

1. Install motor on transom per motor manufacturers instructions.

2. Do not drill through your transom to mount motor.

3. Clamp motor tight enough to avoid slippage off transom.

4. Adjust trim pin on motor so cavitation plate does not boat while under power or at rest.

5. Be sure motor is centered on transom.

6. Double check that cavitation plate does not contact hull.

7. The first time you run the boat, motor a very short distance and double check clearance.

OF THE CAVITATION PLATE IS NOT

RUBBING THE HULL OF YOUR SOLO

SKIFF. THIS WILL CAUSE DAMAGE-

POSSIBLY PUNCTURING THE HULL, A

DANGEROUS SITUATION, AND WILL

IF YOU ARE HAVING TROUBLE ADJUSTING THE MOTOR SO IT DOES NOT RUB CALL YOUR LOCAL

SOLO SKIFF PRO - DO NOT USE BOAT IF IT IS RUBBING OR YOU HAVE A DOUBT

CAUTION!!!

OU MUST MAKE SURE THE FRONT

VOID YOUR WARRANTY

PAGE 6