- ページ 2

ホームシアターシステム Accusound ES 100 WirelessのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Accusound ES 100 Wireless 4 ページ。 Eclipse series home theatre system

ページを印刷する

Congratulations! You have purchased the Accusound Eclipse Series ES 100 Wireless Home Theatre

System. This Wireless system has be designed to the closest tolerance make this the leading wireless

system on the market today. The ES 100 Wireless system has been designed to work on any digital

receiver on the market. The system will give you clear vocals and crisp high-end response from all 5

speakers and solid bass performance from the powered subwoofer that many other leading brands lack.

Unpacking

On the large carton fold back the carton flaps, turn the carton upside down and remove the carton.

There are 4 floor standing speakers, 4 bases, 1 centre speaker with a wireless transmitter built in. Slide

out each speaker from the foam inserts leaving the speakers in the cloth bags which will protect them

until you have installed the system. All the parts are located in a box in the end of the foam insert.

Remove these parts and check against the contents list. Screw the bases on to the 4 floor speakers

using the 8 x 30mm screws supplied x (2 for each base)..Unpack the second carton this contains the

subwoofer.

Just in Case: If you ever move, keep the cartons and packing to ensure protection against damage.

Room Placement

In a 5.1 setup your front speakers should be positioned on either side of the screen as wide apart in the

room as possible. The centre speaker sits in a horizontal position on or in an entertainment cabinet

facing towards the rear surround speakers with a clear line of sight to the surround speakers.

Depending on your room the best position for the left and right surround speakers are slightly back on

either side of your seating position facing you (this is position 1 in the diagram). If there are windows

and doors in the way place the speakers in either corner of the back wall of your room facing up the

room (this is position 2 in the diagram). Each speaker is marked on the back with its position. You

should always look towards the front where the TV is for your position. Front left, centre, front right, rear

surround left is on your left as you look forward and rear surround right is on your right as you look

forward. This is very important as each speaker is tuned for its position. The positioning also depends

on power at the back of the room as each surround speaker is wireless and has to be plugged into the

power. Each surround speaker has a built-in D Class amplifier to produce the sound and is fitted with a

receiver to receive the signal. The ES 100 subwoofer is also powered by its own built-in D Class

amplifier. You can place the subwoofer anywhere in the room.

Room Placement

SPEAKER LEVELS - DO NOT PERFORM THE AUTO MICROPHONE CALIBRATION

All receivers have an auto speaker set up. They have a microphone that sets the level of each

speaker. The ES 100 Wireless rear surrounds are powered and your receiver will not understand that

these speakers are wireless. Follow the manual speaker set up mode on your receiver. All receivers

have a speaker level section in the set up menu. Some receivers have a dB level and other have

vertical bars that show the level. If you have purchased a new receiver the levels will be set to 0.

They can be changed up and down Leave all levels on 0dB Fronts, centre, rear surrounds and

subwoofer.

Listen to hear if all speakers are balanced. You may adjust the centre up or down so you can hear

voice without over riding the 2 front speakers. With the subwoofer you can turn this up or down

depending on how much bass you want. For the rear surrounds you have a volume control on the

rear panel of each speaker. Set this vertical to 0. Listen and turn up or down as they may be close

or far away from you seating position. If you turn up the volume in the speaker set up, you will get

distortion so use the volume control on the speaker.

Subwoofer Set up

Use a good quality subwoofer RCA cable (not supplied) from your receiver's subwoofer output and

plug into the subwoofer LFE on the rear panel of the subwoofer. There is a main power off/on switch

on the subwoofer panel. Turn to on. At the top of the panel there is an OFF/AUTO/ON switch. 'On'

will have the subwoofer running all the time, in the auto position the subwoofer will automatically turn

on when a signal is received from your receiver. After a short time of not receiving a signal the

subwoofer will turn to standby. This is a power saving function and also saves turning the power

switch on and off every time you use the subwoofer and system. Leaving the subwoofer in auto is the

standard setting. When the system is not being used for a period of time or during electrical storms,

turn the subwoofer off at the main power switch.

Non Wireless Surround Speaker and Subwoofer Connection

You have the choice to bypass the Wireless surrounds and connect them in a wired format. Remove

the power lead from the rear speakers and connect speaker wire from the receiver's surround

speaker outputs to each surround speaker. You can NOT connect wireless and wired together. If you

do this it will damage the surround speakers. This method does not require the transmitter to be

connected to the receiver.

Breaking In Your Speakers

The Accusound ES 100 Wireless Eclipse Series loudspeaker system requires a break-in period to

reach its full potential. This is done by playing with a wide variety of frequencies (highs through

lows) at a medium volume for at least 30 hours. You can turn the system up during this time but this

is not recommended for long periods. We use high quality components with tight build tolerances

and they require this break-in time.

After this period you will hear a refinement in the bass

reproduction and the treble will become clearer and more defined.

With any electrical equipment you can have problems with lightning strikes. If you have an electrical

storm, turn your equipment off and use a good quality surge protector. If you are going away for a

period of time turn your entire system off at the power. Do not leave in standby.

ES 100 Wireless 5.1 System

Now it's time to sit back and enjoy your new Accusound Home Theatre Loudspeaker System. This is

an investment in quality sound that you will appreciate time and time again for many years to come.

Thank you for choosing Accusound!