- ページ 7

スイッチ Cisco 1538MのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 1538M 13 ページ。 1538 series micro hubs

Management Options (Cisco 1538M Hub)

The Cisco 1538M hub can manage a single hub or a hub stack. You can use the default

settings shipped with the hub, or you can customize the configuration through the Cisco

1538 Hub Manager web-based interface, the CLI, or SNMP.

The Cisco 1538 Hub Manager is the easiest interface to use for the basic configuration and

monitoring tasks. To perform all the configuration and monitoring tasks, use the CLI and

SNMP.

This section provides the following information:

•

List of default configuration settings for the hub

•

Overview of the Cisco 1538 Hub Manager and the basic management tasks you can

perform using it

Note

Cisco 1538 Hub Manager pages are also provided in the Cisco 1538 Hub Manager

online help.

•

Overview of the CLI, which is fully described in the Cisco 1538 Series Micro Hub

10/100 Command Reference.

•

Overview of SNMP and the hub Management Information Base (MIB) files.

Note

the Diagnostic Console" section on page 4-7.

Procedures for performing management tasks and detailed information about the

The menu-based diagnostic console is described in the "Recovery Procedures Using

Management Options (Cisco 1538M Hub)

Overview 1-7