- ページ 4
スイッチ Cisco 1548MのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 1548M 8 ページ。 10/100
Cisco 1548M にも： リリースノート (4 ページ)
ページを印刷する
Connect the Switch to Other Network
Devices
Note: Use a straight-through cable to
2
connect two ports when one of the ports is
designated with an X. Use a crossover cable
to connect two ports when both ports are
designated with an X.
Connect the Switch to
Servers, Routers, and
Workstations
•
Connect a Category 3, 4, or 5
straight-through cable to any 10/100
port on the switch and to a 10BaseT
port on the workstation, server, or
router.
•
Connect a Category 5 straight-through
cable to any 10/100 port on the switch
and to a 100BaseTX port on the
workstation, server, or router.
C is co 15
48 M
1x
2x
10/1 00
3x
RAT ING
4x
100 -127
/200 -240
100B T-ON
0.3A /
V~
0.2 50/6
/ 10B T-OF
0 Hz
1
F
2 3 4
5 6 7
1 2 3
8
4 5 6
CON SOLE
7 8
FDU P-O
N / HDU
P-O FF
5x
6x
7x
8x
10/100 network
port (RJ-45)
Ethernet cable
(not supplied)
Maximum cable length:
328 ft (100 m)
Connect the Switch to Hubs
and Other Switches
•
Connect a Category 3, 4, or 5 crossover
cable to any 10/100 port on the switch
and to a 10BaseT port on the target hub
or switch.
•
Connect a Category 5 crossover cable to
any 10/100 port on the switch and to a
100BaseTX port on the target hub or
switch.
10BaseT or
100BaseTX port
(RJ-45)