- ページ 10
スイッチ Cisco 2960-48TC - Catalyst SwitchのPDF データシートをオンラインで閲覧またはダウンロードできます。Cisco 2960-48TC - Catalyst Switch 15 ページ。 Ethernet power consumption
Cisco 2960-48TC - Catalyst Switch にも： データシート (16 ページ), データシート (9 ページ), 製品情報 (5 ページ), パンフレット＆スペック (10 ページ), データシート (14 ページ), 補足マニュアル (12 ページ)
ページを印刷する
Description
Connectors and Cabling
Power Connectors
Indicators
Dimensions (H x W x D)
Weight
Environmental Ranges
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Specification
•
10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
•
100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling
•
1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling
•
1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling
•
1000BASE-SX, -LX/LH, -ZX, -BX and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber)
•
100BASE-LX10, -BX, -FX: LC fiber connectors (single/multimode fiber).
Customers can provide power to a switch by using either the internal power supply or the Cisco RPS 675.
The connectors are located at the back of the switch.
Internal-Power-Supply Connector
•
The internal power supply is an autoranging unit.
•
The internal power supply supports input voltages between 100 and 240VAC.
•
Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
Cisco RPS Connector
•
The connector offers connection for an optional Cisco RPS 675 that uses AC input and supplies DC output to the
switch.
•
The connector offers a 675W redundant power system that supports up to six external network devices and
provides power to one failed device at a time.
•
The connector automatically senses when the internal power supply of a connected device fails and provides
power to the failed device, preventing loss of network traffic.
•
Only the Cisco RPS 675 (model PWR675-AC-RPS-N1=) should be attached to the redundant-power-supply
receptacle.
•
Per-port status: Link integrity, disabled, activity, speed, full-duplex
•
System status: System, RPS, link status, link duplex, link speed
•
Cisco Catalyst 2960-24TT: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
•
Cisco Catalyst 2960-48TT: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
•
Cisco Catalyst 2960-24TC: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
•
Cisco Catalyst 2960-48TC: 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm)
•
Cisco Catalyst 2960G-24TC: 1.73 x 17.5 x 12.9 in. (4.4 x 44.5 x 32.8 cm)
•
Cisco Catalyst 2960-24TT: 8.0 lb (3.6 kg)
•
Cisco Catalyst 2960-48TT: 8.0 lb (3.6 kg)
•
Cisco Catalyst 2960-24TC: 8.0 lb (3.6 kg)
•
Cisco Catalyst 2960-48TC: 8.0 lb (3.6 kg)
•
Cisco Catalyst 2960G-24TC: 10.0 lb (4.5 kg)
•
Operating temperature: 32 to 113ºF (0 to 45ºC)
•
Storage temperature: –13 to 158ºF (–25 to 70ºC)
•
Operating relative humidity: 10 to 85% (noncondensing)
•
Operating altitude: Up to 10,000 ft (3049 m)
•
Storage altitude: Up to 15,000 ft (4573 m)
© 2005 Cisco Systems, Inc. All rights reserved.
Page 10 of 15