- ページ 14
パーソナルケア製品 BYECOLD BKD-G1006-WLH/DのPDF 設置および操作方法をオンラインで閲覧またはダウンロードできます。BYECOLD BKD-G1006-WLH/D 15 ページ。
ページを印刷する
clean it under running water. Do not use thinner, toluene,benzene, acidic/alcoholic
cleaning agents, or any chemical clothes on the appliance.
After regular care and cleaning, well pack it into the original packing box, then put it to
dry and cool environment for storage.
Wind and keep dry the cable when not in use.
TROUBLESHOOTING
The device has been checked for proper functioning several times during production. If
malfunction occur nonetheless, check the device according to the following list.
Problem
The touch button does not light
The device makes noises after
switch-on
The surface bulges slightly
Indoor Temperature / humidity
are displayed inaccurately
The device is unable to connect
WIFI
The
real-time
weather
displayed inaccurately
Display code Err
Display code 05
Display code 201
Reason
The device does not start
Some
parts
are
caused by transportation
The material expands due
to heating
The sensor maybe covered
Wifi signal is poor or
network failures
is
weather data is not updated
The
device
failed
connect
to
configured
network, and the previous
data already expired.
The configured router is
connected to too many
devices
The configured network is
unreachable
or
hotspot is replaced
11
Check the power connection
It's a normal process. No measure are
loose
required.
It's a normal process. No measure are
required.
Make sure that the senor is placed at a
right position,should not be covered
or touched by other materials.
Restart the router and device.
Connect another sever in your APP.
to
Restart your router, make sure that the
wifi signal strength as good as enough
Replace another router or reduce
connected devices.
Make sure the device, Wi-Fi router
. WIFI
and the smartphone closer together.
Refer to Step 8-(7).
Measure