- ページ 32

スイッチ Cisco 3020 - Cisco Catalyst Blade SwitchのPDF リリースノートをオンラインで閲覧またはダウンロードできます。Cisco 3020 - Cisco Catalyst Blade Switch 41 ページ。 Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
Cisco 3020 - Cisco Catalyst Blade Switch にも: スタートマニュアル (37 ページ), スタートマニュアル (31 ページ), クイックスペック (12 ページ), リリースノート (27 ページ), リリースノート (23 ページ), リリースノート (21 ページ), インストレーション・マニュアル (21 ページ)

Cisco 3020 - Cisco Catalyst Blade Switch リリースノート
Documentation Updates
Error Message WCCP-1-SERVICELOST: Service [chars] lost on WCCP Client [IP_address]
Explanation
name of the service, and [IP_address] is the client IP address.
Recommended Action
These system messages were updated in the system message guide:
Error Message EC-5-CANNOT_BUNDLE_LACP: [chars] is not compatible with aggregators in
channel [dec] and cannot attach to them ([chars]).
Explanation
channel. [chars] is the incompatible port. [chars] is the short interface name, such as Gi1/0/1 on a
Catalyst 3750 switch, [dec] is the channel group number, and the last [chars] is the reason.
Recommended Action
port.
Error Message EC-5-DONTBNDL: [chars] suspended: incompatible remote port with
[chars]
Recommended Action
remote ports in the bundle. A port can only join the bundle when its global configuration and the
configuration of the remote port are the same as other ports in the bundle. The first [chars] is the
suspended local interface, and the second [chars] is the local interface that is already bundled.
Error Message PORT_SECURITY-6-VLAN_REMOVED: VLAN [int] is no longer allowed on port
[chars]. Its port security configuration has been removed.
Explanation
VLAN list change and is removed from the configuration. [int] is the VLAN ID, and [chars] is the
switch port assigned to the VLAN.
Recommended Action
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(35)SE and Later
32
WCCP has lost the service associated with the specified WCCP client. [chars] is the
Verify the operational state of the WCCP client.
The port has different port attributes than the port channel or ports within the port
For the port to join the bundle, change the port attributes so that they match the
The configuration of the remote port differs from the configuration of other
A configured VLAN has been excluded either due to a port-mode change or an allowed
No action is required.
OL-8918-03