- ページ 5

温度計 ByFlo Products PG-IRT1602のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ByFlo Products PG-IRT1602 9 ページ。

ページを印刷する

1. Switching from °C to °F

Functions Settings

1- Sound Function: Turn On/Off

When the device is On, press the "mem" key to set the sound

to On or Off.

Press "mem" button. The LCD screen will show

will hear a short beep.

To turn the sound Off, press "mem" button again,

change into

2- Switching from °C to °F

When the device is Off , press the "mem" button for six

seconds. You can now switch between Fahrenheit degree

(°F) and Celsius degree (°C).

Wait for 8 seconds to turn off the product automatically or

press the power button .

3- Memory Storage Function

When the device is Off, press "mem" button. You will see the

last 9 measurement values. The device will turn off

automatically, or press the power button.

4- Back Light Display

When the measured temperature is below 34°C (93.2°F), the

screen will read LO on a RED backlight.

When the measured temperature is 34-37.1°C (93.2-98.8°F),

the screen will display a GREEN backlight.

When the measured temperature is 37.2-38.1°C (98.9-100.5°

F), the screen will display an ORANGE backlight.

When the measured temperature is 38.2-43.0°C

(100.6-109.4F), the screen will display a RED backlight.

When the measured temperature is above 43.0°C (109.4°F),

the screen will read HI on a RED backlight.

How to Use

1- Forehead Temperature Measurement

• Press the power button to start the thermometer

• Aim the thermometer to the center of the forehead with a

distance of 1.18-2in (3-5cm).

and you

• Press the temperature button to take the temperature.

• Once you hear the beep, the temperature will be displayed.

will

The LCD flashes as the

temperature is being

Note: If you do not hear the beep, the measurement hasn't

been completed. Do not remove the thermometer away from

the forehead until you hear the beep. (If you have deactivated

the sound, no beep will be heard)

2- Object Measurement

• Long press the power button for 6 seconds to enter the

Object Mode.

• Point the thermometer at the center of the object.

• Press the temperature button to take the temperature.

• Once you hear the beep, the temperature will be

displayed.

Note: If you do not hear the beep, the measurement hasn't

been completed. Do not remove the thermometer away from

the forehead until you hear the beep. (If you have deactivated

the sound, no beep will be heard)

measured.