- ページ 13

スイッチ Cisco 550XG seriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 550XG series 17 ページ。 10g stackable managed switches

Bad Console port connection:

Check the console cable connectors to make sure that they are firmly

plugged into the switch and your computer. Make sure that the console

port utility is configured with the correct parameters.

Wrong IP address:

Make sure that you are using the correct IP address of the switch. You

can determine the current IP address of the switch from the CLI

through the console port, or from your network administrator. The

System LED provides an indication of where the switch received the IP

address (See

using the same IP address as the switch.

No IP route:

If the switch and your computer are in different IP subnets, you need

one or more routers to route the packets between the two subnets.

Unusually long access time:

Due to the standard spanning tree loop detection logic, adding new

connections may take 30 to 60 seconds for the affected interfaces

and/or LAN to become operational.

Cisco 550XG Series 10G Stackable Switches Quick Start Guide

Front Panel

for details.) Make sure that no other device is