- ページ 8

プリンター DigiPos DS-810のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DigiPos DS-810 14 ページ。

♣CAUTION:

Turn off the printer while removing the DIP switch cover to prevent an electric short, which can

damage the printer.

1. Make sure the printer is turned off.

2. Take off the DIP switch cover as shown in the illustration below.

3. Set the switches using a pointed tool, such as tweezers or a small screwdriver.

4. Replace the DIP switch cover. .

The new settings take effect when you turn on the printer.

♣CAUTION:

When the paper is jammed with cutter, the top cover might be stuck. In this case, repeat power on

and off several times.

If the top cover is still stuck, please follow the steps to release the papers from jamming.

1. Make sure the printer is turned off.

2. Take out DIP switch cover as shown.

3. Turn screw with drivers to a direction until paper is released from the cutter.