- ページ 2

スイッチ Cisco 6513 - Catalyst SwitchのPDF 電源マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 6513 - Catalyst Switch 4 ページ。 Catalyst 6500 series chassis and module power and heat values
Cisco 6513 - Catalyst Switch にも：データシート (30 ページ), 技術情報 (16 ページ)

ページを印刷する

Cisco Catalyst 4006 Switch

Fig 1. 4006 Switch

Powering IP phones from the Catalyst 4006 Switch requires the addition of an external

power shelf (Fig 2) and power modules (Fig 3.). The total power draw for a totally

utilized switch is just above 3000 Watts.

Recommended UPS: SYH6KNRMT-P1

This is a 4.2 KW Symmetra RM UPS with an N+1 Redundant architecture that will

provide ten minutes of runtime at full load. This product requires an L6-30R for input

and ships standard with two L6-20R, one L6-30R, and a step down transformer (SYTF2)

with twelve 5-20 outlets. The transformer plugs directly into the output L6-30R. The

customer should order the 4006 switch with NEMA 5-15P plugs for each power supply.

Fig. 4 SYH6KNRMT-P1

front view

(figure 4, 5, and 6 below)

Fig. 5 SYH6KNRMT-

P1 rear view

Fig 2. External Power Shelf

Fig 3. External Power Supply

Fig. 6 SYTF2 front

and rear