- ページ 7

スイッチ Cisco 8800 SeriesのPDF ハードウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 8800 Series 25 ページ。 Hosted enterprise uc ip phone
Cisco 8800 Series にも: ユーザーマニュアル (4 ページ), クイックスタート (2 ページ), マニュアル (10 ページ), クイック・スタート・マニュアル (3 ページ), クイック・スタート・マニュアル (2 ページ), スタートマニュアル (2 ページ), ユーザーマニュアル (24 ページ), クイック・リファレンス (2 ページ), ユーザーマニュアル (28 ページ), クイック・スタート・マニュアル (3 ページ), ファームウェア移行マスターマニュアル (31 ページ), ユーザーマニュアル (2 ページ), ユーザーマニュアル (30 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), マニュアル (44 ページ), マニュアル (13 ページ), マニュアル (14 ページ), マニュアル (4 ページ), マニュアル (4 ページ), スタート (6 ページ), クイック・スタート・マニュアル (19 ページ), メンテナンス・マニュアル (6 ページ), クイックスタート (2 ページ), クイック・ユーザー・マニュアル (2 ページ), エンドユーザマニュアル (6 ページ), クイック・スタート・マニュアル (2 ページ), トラブルシュート (4 ページ), クイック・リファレンス・マニュアル (7 ページ), クイック・スタート・マニュアル (2 ページ), マニュアル (22 ページ), マニュアル (22 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), マニュアル (48 ページ), ユーザーマニュアル (40 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ), クイック・スタート・マニュアル (2 ページ)

Cisco 8800 Series ハードウェア・インストール・マニュアル
Additional guides, such as command reference guides and error message documentation, can help with
Step 8
the daily operation and maintenance of your switch.
User guide titles may be different for earlier software releases. The titles shown in
Note
September 2005 release.
User Guide Titles and Descriptions
Table 3
product releases. User documentation and release notes in
information about which multiservice switch or media gateway the document supports.
The Cisco MGX 8230, Cisco MGX 8250, and Cisco MGX 8850 (PXM1) switch documentation was not
updated for the September 2005 release. Therefore, some information about configuring and using the
new MPSM-8-T1E1 card in these switches is included in the following guides:
Information about how to install or upgrade to the MPSM-8-T1E1 card in Cisco MGX 8230, Cisco
MGX 8250, and Cisco MGX 8850 (PXM1) switches is in the Release Notes for Cisco MGX 8230, Cisco
MGX 8250, and Cisco MGX 8850 (PXM1) Switches, Release 1.3.14.
Refer to each product's release notes for the latest information on features, bug fixes, and more.
Note
Terms
Two main types of ATM cards are used in MGX switches: AXSM and AUSM. AXSM stands for ATM
Switching Service Module. AUSM stands for ATM UNI (User Network Interface) Service Module.
CWM stands for Cisco WAN Manager, our multiservice switch network management system.
Legacy service module refers to a previously introduced card. For this release, the term is used
specifically for the CESM-8-T1E1, FRSM-8-T1E1, and AUSM-8-T1E1 cards, which can now be
replaced by the new MPSM-8-T1E1 card.
MPSM stands for Multiprotocol Service Module.
RPM stands for Route Processor Module.
SES stands for Service Expansion Shelf.
VISM stands for Voice Interworking Service Module.
VXSM stands for Voice Switch Service Module.
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
lists the technical guides and release notes that support the September 2005 multiservice switch
Cisco ATM Services (AUSM/MPSM-8-T1E1) Configuration Guide and Command Reference for
MGX Switches, Release 5.2
Cisco Frame Relay Services (FRSM/MPSM-8-T1E1) Configuration Guide and Command Reference
for MGX Switches, Release 5.2
Cisco Circuit Emulation Services (CESM/MPSM-8-T1E1) Configuration Guide and Command
Reference for MGX Switches, Release 5.2
Table 3
are listed in order of use and include
Cisco MGX 8800/8900 Series Hardware Installation Guide
Documentation
Table 3
are for the
xxxix