- ページ 8

スイッチ Cisco 9134 - MDS Multilayer Fabric SwitchのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 9134 - MDS Multilayer Fabric Switch 16 ページ。 Mds 9000 series
Cisco 9134 - MDS Multilayer Fabric Switch にも：仕様 (3 ページ), 設定マニュアル (49 ページ), リリースノート (48 ページ), リリースノート (44 ページ), リリースノート (22 ページ), リリースノート (3 ページ), リリースノート (40 ページ), リリースノート (10 ページ), ハードウェア・インストール・マニュアル (36 ページ)

About SME

Single-Fabric Topology for Tape

Figure 1-3

MSM-18/4 module. The Cisco MSM-18/4 module can be anywhere in the fabric. SME does a one-to-one

mapping of the information from the host to the target and forwards the encrypted data to the dedicated

HR tape. SME also tracks the barcodes on each encrypted tape and associates the barcodes with the host

servers.

Figure 1-3

Data from the email server is not encrypted when backed up to the dedicated email tape library.

Figure 1-3

Email Server

running SAN-OS 3.2

Email tape

Tape devices should be connected to core switches such as an MDS 9500 Series switch or MDS 9222i

Note

switch running Cisco SAN-OS Release 3.2(2c) or later or Cisco NX-OS Release 4.x or later.

Encryption and compression services are transparent to the hosts and storage devices. These services are

available for devices in any virtual SANs (VSANs) in a physical fabric and can be used without rezoning.

Cisco MDS 9000 Family NX-OS Storage Media Encryption Configuration Guide

1-8

shows a single-fabric topology in which the data from the HR server is forwarded to the Cisco

shows encrypted data from the HR server is compressed and stored in the HR tape library.

SME: Single-Fabric Topology

Application servers

Cisco MDS 9500 Series

Cisco MDS 9200 Series

Encryption

MDS switch

Compression

library

Tape libraries

HR Server

MSM-18/4 module switch with SME

enabled (cluster mode)

HR tape

library

Chapter 1

Storage Media Encryption Overview

OL-29289-01