バッテリーチャージャー DigiPower RF-2600のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DigiPower RF-2600 2 ページ。 2 in 1 usb wall charger + power bank

ページを印刷する
Item No. RF-2600/JS-2600
2 IN 1 USB WALL CHARGER +
POWER BANK
CHARGEUR MURAL USB 2 EN 1 + CHARGEUR PORTATIF
CARGADOR USB DE PARED 2-EN-1 + BANCO DE ENERGÍA
USER GUIDE •
GUIDE D'UTILISATION • GUÍA DEL USUARIO
USER GUIDE
ENGLISH
PRODUCT DIAGRAM
4 LED charge indicator
Power ON/OFF button
USB port
Flip open AC plug
CHARGING YOUR DEVICE
1. Connect your USB cable to the power bank and the other
end to your device.
2. Press and hold the power button for 2 seconds, the LEDs
will display the current charge level and the power bank
will turn on.
3. The LEDs on the power bank will turn off after 5 seconds
to conserve power. Your device will indicate it is now
charging.
4. To check the battery level at any time press and release the
power button.
5. To use the wall charger feature simply plug the power
bank into a wall outlet and your device will begin charging.
6. The power bank will charge your device until full then it
will automatically begin to charge its own internal battery.
Important Notes:
A quick press of the power button checks the battery level, a long press turns
the power bank on or off.
If the power bank is turned on and no device has been connected within a
minute it will turn itself off to conserve power. To turn it back on press and
hold the power button for 2 seconds.
isit
V
www.digipowersolutions.com/support
support page for more information and
additional language translations.
Visita la página de
www.digipowersolutions.com/support
soporte para más información y traducciones
de idiomas adicionales.
Visitez la page support
www.digipowersolutions.com/support
pour plus d'informations et des traductions
de langues supplémentaires.
CHARGING YOUR POWER BANK
1. Flip open the AC plug and connect to a standard wall outlet.
2. T he LEDs on the power bank will blink from 1 to 4 while the pack
is charging.
3. When the pack is fully charged, all 4 LEDs will be lit.
|
1
Questions? Problems? Picked upthe wrong item?
Before RETURNING to the Store,
please give our customer service team
a chance to help. Call us toll free at: 1.800.838.3200
for a seamless and speedy resolution.
•
¿Preguntas? ¿Problemas?
¿Se compró el producto equivocado?
Antes de REGRESARLO a la tienda, por favor dele una
oportunidada nuestro personal del servicio
al cliente a que le ayuden.
Llámenos gratuitamente al: 1.800.838.3200
para una resolución rápida y sin problemas.
•
Des questions? Des problèmes?
Vous avez ramassé le mauvais article?
Avant de REVENIR au magasin, laissez la chance à notre
équipe du Service à la clientèle de vous aider.
Appelez-nous sans frais au numéro 1.800.838.3200
pour que nous puissions corriger rapidement la situation.
BATTERY LEVEL INDICATOR
STATUS DISPLAY STATE
BATTERY LEVEL
One LED is blinking
Very low, recharge soon
One LED is on
Below 25%
Two LEDs are on
25% - 50%
Three LEDs are on
50% - 75%
All four LEDs are on
75% - 100%
CHARGING STATUS INDICATOR
STATUS DISPLAY STATE
One LED is blinking
One LED is on, next LED is blinking
Two LEDs are on, next LED is blinking
Three LEDs are on, last LED is blinking
All four LEDs are on
To conserve energy, the LEDs will go off when fully charged.
Press the power button to confirm the pack is fully charged
|
2
©2014 Mizco International, Inc.
Avenel, New Jersey
All rights reserved.
Todos los derechos reservados.
Tous droits réservés.
www.digipowersolutions.com
tel: 800•838•3200
DIGIPOWER is a registered trademark
of Mizco International Inc.
DIGIPOWER es una marca registrada
de Mizco International Inc.
DIGIPOWER est une marque de
commerce enregistrée
de Mizco International, Inc.
TECHNICAL SPECIFICATIONS
IMPUT:
• Battery capacity: 3.7V 2600mAh
• Input: AC 100-240V – 50/60Hz 0.3A
OUTPUT:
• DC 5V 1000mA
WARNING! IMPORTANT SAFETY INSTRUCTIONS!
Failure to read and follow these safety instructions could result in
fire, explosion, electrical
shock or other hazard, causing serious and/or fatal injury and/or
property damage.
1.
Do not modify, disassemble, open, drop, crush, puncture
or shred the product
CHARGE STATUS
2.
Do not expose the product to rain or water
3.
Keep the product away from open flame or sunlight to
Below 25%
prevent heat build-up
25% - 50%
4.
Keep the product away from children. This product is not a toy.
5.
Ensure that all persons who use the product read and
50% - 75%
follow these warnings and instructions.
75% - 100%
Charging complete
|
3
|
4