- ページ 11
スイッチ Cisco AP775A - Nexus Converged Network Switch 5010のPDF リリースノートをオンラインで閲覧またはダウンロードできます。Cisco AP775A - Nexus Converged Network Switch 5010 26 ページ。 Cisco nexus 5000 series release notes release 4.1(3)n1(1) (ol-16601-01 h0, july 2009)
Cisco AP775A - Nexus Converged Network Switch 5010 にも： リリースノート (48 ページ), リリースノート (44 ページ), リリースノート (26 ページ), クイック・リファレンス・マニュアル (14 ページ)
ページを印刷する
S e n d d o c u m e n t a t i o n c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
•
•
•
•
•
•
•
OL-16601-01
CSCsx60187
Symptom: Configure duplicate IP address for multiple SVI interfaces.
Workaround: Do not configure two or more SVIs with the same IP address.
CSCsx80279
Symptom: When traffic is sent at line rate as a single burst, all addresses are not learned when egress
interfaces are FEX facing ports. This problem does not occur if sustained traffic is sent for more than
0.4 seconds.
Workaround: Resending the unlearned MAC addresses would render them relearned.
CSCsy99816
Symptom: When a Cisco Nexus 2000 Fabric Extender is already online and a fabric interface that is
not part of a port channel is configured with a serial number that does not match that of the FEX,
the fabric interface will be brought down, and show interface fex does not display the reason for
being down.
Workaround: None. This is a display issue.
CSCsy02439
Symptom: Under some circumstances, the FC MAC driver displays the following error message:
%KERN-3-SYSTEM_MSG: FCP_ERRFCP_PORT: gat_fcp_isr_ip_fcmac_sync_intr@424, jiffies =
0x1c422:Unknown intr src_id 41 - kernel
The error message is when an unused interrupt in the MAC fires. The error message does not
indicate any functional problem.
Workaround: None
CSCta78541
Symptom:
VSH crashes and generate a core when you do the following:
attach fex 102
show system error-id list
The Cisco Nexus 2000 Fabric Extender does not reload and the core does not impact the
functionality of the Fabric Extender.
Workaround: None
CSCta74119
Symptom: DCBX fails to converge between a Nexus 5000 switch running 4.1(3)N1(1) and another
Nexus 5000 switch running a 4.0(1a)N based release. As a result, priority-flow-control does not
work on this link.
Workaround: None.
CSCta85268
Symptom: When you downgrade from release 4.1(3)N1(1) to 4.0(1a)N-based releases using Fabric
Manager or when you upgrade from a 4.0(1a)N-based release to 4.1(3)N1(1) using Fabric Manager
error messages such as the following are generated:
2009 Jul 19 15:32:55 N5K-C snmpd: SNMP Operation (GET) timed out. reqId
(1448314586) errno (62) on iso.3.6.1.4.1.9.9.360.1.1.4.2.0
2009 Jul 19 15:32:56 N5K-C snmpd: SNMP Operation (GET) failed. Reason:13 reqId
(1448314586) errno (0) error index (1)
Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes, Release 4.1(3)N1(1)
Caveats
11