- ページ 15

スイッチ Cisco BTS 10200 SoftswitchのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco BTS 10200 Softswitch 29 ページ。 T.38 fax relay

Cisco BTS 10200 Softswitch T.38 Fax Relay

H.323 Trunk Group Profile

The H.323 Trunk Group Profile (h323-tg-profile) table defines the characteristics of each H.323 trunk.

A h323-tg-profile id must be created in this table before H.323 trunk group entries can be added.

Table Name: H323-TG-PROFILE

Table Containment Area: Call Agent

Command Types

Show, add, change, and delete

Examples

•

Usage Guidelines

Primary Key Token(s): id

Add Rules: FK constraints.

•

Change Rules: FK constraints.

Delete Rules: FK constraints.

Token Properties

Table 3 lists the token properties that were added to this command for T.38 Fax Relay.

Table 4

Token

FAX-T38-CAMODE-SUPP

CA-controlled T.38 fax relay in

real time (CA instructs GW

when to switch to T.38 mode).

FAX-INBAND-SUPP

FAX-PREF-MODE

Designates preferred mode of

T.38 fax relay for this gateway.

show h323-tg-profile [email protected]

add h323-tg-profile id= ras-tg; ras=n;

change h323-tg-profile id= ras-tg; ras=y;

delete h323-tg-profile id= ras-tg;

If fax-pref-mode=FAX-T38-CAMODE, then fax-t38-camode-supp=Y;

If fax-pref-mode=FAX-INBAND, then fax-inband-supp=Y;

T.38 Fax Relay Tokens

Values

Y/N (Default = Y)

Y/N (Default = N)

FAX-T38-CAMODE—This is the default value.

FAX-INBAND—Possible only for G.711 and G.726. supported by

MGX 8260.

Cisco BTS 10200 Softswitch T.38 Fax Relay Support

H.323 Trunk Group Profile