スイッチ Cisco Business 250 SeriesのPDF 知るをオンラインで閲覧またはダウンロードできます。Cisco Business 250 Series 16 ページ。 Smart switches
Cisco Business 250 Series にも： クイック・スタート・マニュアル (2 ページ), クイックスタートマニュアル (5 ページ), 知る (10 ページ), クイック・スタート・マニュアル (17 ページ), クイック・スタート・マニュアル (5 ページ), クイック・スタート・マニュアル (49 ページ)
ページを印刷する
Get To Know Your Switch
This chapter contains the following sections:
•
•
•
•
•
•
•
•
•
•
Introduction
Thank you for purchasing the Cisco CBS Series Switch. The Cisco CBS Series Switches combine powerful
network performance and reliability with a complete suite of network features that you need for a solid business
network. These expandable Gigabit Ethernet switches, with Gigabit or 10-Gigabit uplinks, provide multiple
management options, rich security capabilities, and Layer-3 static routing features far beyond those of an
unmanaged or consumer-grade switch, at a lower cost than fully managed switches.
Before You Begin
Before you begin installing your device, ensure that the following items are available:
• RJ-45 Ethernet cables for connecting network devices. A category 6a and higher cable is required for
• Tools for installing the hardware.
Introduction, on page 1
Rack Mounting Switch, on page 2
Wall Mounting a Switch, on page 3
Out-Of-Band Port, on page 5
Stacking the Switches, on page 6
Power over Ethernet Considerations, on page 8
Front Panel, on page 10
Configuring Switches, on page 12
Restoring Factory Default Settings, on page 14
Navigation, on page 15
10G ports; a category 5e and higher cable is required for all other ports.
• The rack-mount kit packed with the switch contains four rubber feet for desktop placement, and
two brackets and twelve screws for rackmounting.
• If the supplied screws are lost, use replacement screws in the following size:
• Diameter of the screw head: 6.9 mm
• Length of face of screw head to base of screw: 5.9 mm
Get To Know Your Switch
1