- ページ 10

アンプ Accustic Arts POWER I youのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Accustic Arts POWER I you 13 ページ。

By holding down the right rotary control, the countdown counter counts from 8 to 0, whereby the volume

is continuously increased until the switch is made from

"U0" to "U1".

If you release the rotary knob within

the count down cycle, the unity gain setting is canceled.

If the display shows "U1", the volume control for the previously selected input is bridged. The volume

setting of the previously selected input is now bypassed and the next time it is selected, it becomes the

press the volume button, the volume setting is temporarily

reactivated. As soon as the input is changed once and you select the "UNITY GAIN input" again, the

volume setting is bypassed again.

To deactivate the "UNITY GAIN" setting, call up the Unity Gain menu "5" in the menu again and briefly

press the volume button once. The display then changes from "U1" to "U0" and the standard mode is

restored.

DANGER! To avoid damaging your speakers, you should be absolutely certain that you have selected the

correct input for this setting when using the "UNITY GAIN" setting.

Turning the left rotary knob to the right takes you to the next settings menu, turning it left to the menu in

front of it.

6. Level adjustment

In this menu, you can adjust the level by + -12dB for each input, to avoid gross volume jumps when

switching between the inputs.

The right knob first selects the input you want to level. Then press the right-hand rotary knob and then

adjust the level by turning the rotary knob. Press the rotary knob again to return to the input selection.

Turn the right knob to select the next input whose level you want to set. Now press the rotary knob again

and adjust the level for this input. Press the knob again to go back to the input selection. Now you can

turn the right knob to select the next input, and so on.

By turning the left knob to the right you will reach the next setting menu, by turning to the left in front of

the menu.

7. Headphone output on-off

By pressing the right knob, the headphone output can be switched on (1) or off (0).

By turning the left knob to the right you will reach the next setting menu, by turning to the left in front of

the menu.

8. Speaker output On-Off

By pressing the right knob, the loudspeaker output can be switched on (1) or off (0). Use this function to

switch off the speakers when you want to listen to headphones alone. When the speakers are switched

back on, the initial volume is also set to the value set in # 2. To avoid unexpected volume jumps.

By turning the left knob to the right you will reach the next setting menu, by turning to the left in front of