- ページ 3

スイッチ Cisco Catalyst 2955 SeriesのPDF インストレーション・ノートをオンラインで閲覧またはダウンロードできます。Cisco Catalyst 2955 Series 12 ページ。 Ios software release 12.1(14)ea1
Cisco Catalyst 2955 Series にも：製品情報 (3 ページ), トラブルシューティングマニュアル (6 ページ), 製品サポート速報 (6 ページ)

ページを印刷する

Figure 2

Catalyst 2955 switch top panel

DIN rail clip assembly

This equipment is supplied as "open type" equipment. It must be mounted within an enclosure that is

Warning

suitably designed for those specific environmental conditions that will be present and appropriately

designed to prevent personal injury resulting from accessibility to live parts. The interior of the

enclosure must be accessible only by the use of a tool.

The enclosure must meet IP 54 or NEMA type 4 minimum enclosure rating standards.

Caution

To prevent the switch from overheating, there must be a minimum of 3 inches between any other device

and the top, bottom, or sides of the switch.

OL-5262-01

DIN Rail Clip Face-Down Mounting Configuration

3 DIN rail clip mounting screws

Catalyst 2955 Switch DIN Rail Clip Installation Notes

Mounting the Switch on a DIN Rail