- ページ 3

計測機器 Digisat TM-610のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Digisat TM-610 7 ページ。 Dvb-t/t2 handheld meter

○

/ :

Move focus or change value,

7 .

○

8 . MENU: Go into main menu or exit from the current menu

○

9 . OK: Confirm

○

: Turn the meter on/off, press and hold for 2 seconds to power on the meter.

10 .

○

11 . Charging: Connect with the charger cord for charging the equipment.

○

12 . Reset: Reset the meter

How to measure

Connect the antenna to LNB INPUT port first.

Power on the meter, then Main Menu will be show on the screen. Press [◄/►] to read the real level value of the

frequency that you want to measure. And press [▲/▼] to adjust the range of signal level. The display range is

30~100 dBµV. Press OK button to edit the range of spectrum and the range is 44.00 ~ 862.00 MHZ. If the antenna

needs the power supply, please enable power supply from SETTING sub Menu.

Please refer below descriptions if you want to learn all functions.

1. Channel No: [◄/►] button to change channel number or press [OK] button to choose channel from channel

list.

2. Lock Status: Show signal lock status.

3. Antenna Power:

OFF: The power to antenna is shutdown.

5V: DC5V is supplied to antenna.

4. Battery Status: Show power lever in battery.

5. DVB System: [◄/►] or [OK] button to change DVB system between DVBT and DVBT2.

6. Channel frequency: Show the frequency of current channel.

7. Bandwidth: [◄/►] or press [OK] to change channel bandwidth between 6MHz, 7MHz and 8MHz.

TM-610 User`s Manual

/ :

Move focus or change value.

3/7