- ページ 17
スイッチ Cisco Catalyst 2960-CXのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Catalyst 2960-CX 24 ページ。
Cisco Catalyst 2960-CX にも： 製品概要 (15 ページ)
ページを印刷する
- 1. Table of Contents
- 2. Finding Feature Information
- 3. Prerequisites for Switch Stacks
- 4. Restrictions for Switch Stacks
- 5. Information about Switch Stacks
- 6. How to Configure a Switch Stack
- 7. Troubleshooting the Switch Stack
- 8. Monitoring the Device Stack
- 9. Configuration Examples for Switch Stacks
- 10. Additional References for Switch Stacks
Managing Switch Stacks
Step 4
Step 5
Removing Provisioned Switch Information
Before you begin, you must remove the provisioned switch from the stack. This optional task is available
only from the stack master.
Procedure
Step 1
Step 2
Step 3
Step 4
Example
If you are removing a provisioned switch in a stack with this configuration:
• The stack has four members
Command or Action
end
Example:
Switch(config)# end
copy running-config startup-config
Example:
Switch# copy running-config
startup-config
Command or Action
configure terminal
Example:
Switch# configure terminal
no switch stack-member-number provision
Example:
Switch(config)# no switch 3 provision
end
Example:
Switch(config)# end
copy running-config startup-config
Example:
Switch# copy running-config
startup-config
Removing Provisioned Switch Information
Purpose
Returns to privileged EXEC mode.
(Optional) Saves your entries in the
configuration file.
Purpose
Enters global configuration mode.
Removes the provisioning information for the
specified member.
Returns to privileged EXEC mode.
(Optional) Saves your entries in the
configuration file.
Managing Switch Stacks
17