- ページ 12
アクセサリー FIBARO FGMS-001のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。FIBARO FGMS-001 20 ページ。 Motion sensor
FIBARO FGMS-001 にも： 取扱説明書 (2 ページ), 取扱説明書 (11 ページ)
ページを印刷する
12
ADvAnCED PARAMETERS
3. Motion detection - pulse counter
This parameter determines the number of moves required for the PIR
sensor to report motion. The higher the value, the less sensitive the
PIR sensor is.
It is not recommended to modify this parameter settings!
Available settings: 0 - 1 pulse
Default setting:
4. Motion detection - window time
Period of time during which the number of moves set in parameter
3 must be detected in order for the PIR sensor to report motion. The
higher the value, the more sensitive the PIR sensor is.
It is not recommended to modify this parameter setting!
Available settings: 0 - 4 seconds
Default setting:
6. Motion detection - alarm cancellation delay
Time period after which the motion alarm will be cancelled in the
main controller and associated devices.
Any motion detected during this period resets the timer.
Available settings: 1-32767 (in seconds)
Default setting:
8. Motion detection - operating mode
This parameter determines in which part of day the PIR sensor will be
active.
This parameter influences only the motion reports and associations.
Tamper, light intensity and temperature measurements will be still
active, regardless of this parameter settings.
Available settings: 0 - PIR sensor always active
Default setting:
1 - 2 pulses
2 - 3 pulses
3 - 4 pulses
1 (2 pulses)
Parameter size:
1 - 8 seconds
2 - 12 seconds
3 - 16 seconds
2 (12 seconds) Parameter size:
30 (30s)
Parameter size:
1 - PIR sensor active during the day only
2 - PIR sensor active during the night only
0
Parameter size:
1 [byte]
1 [byte]
2 [bytes]
1 [byte]