- ページ 13

スイッチ Cisco Catalyst 3560のPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco Catalyst 3560 20 ページ。 Compact switches
Cisco Catalyst 3560 にも：スタートマニュアル (37 ページ), 製品情報 (3 ページ), 製品情報 (5 ページ), パンフレット (17 ページ)

ページを印刷する

Securing the Switch on a Desk or Shelf (Catalyst 3560 8- and 12-Port Switches)

To place a Catalyst 3560 8- or 12-port switch on a desk without using the mounting screws, attach the four rubber feet to the

bottom panel of the switch.

To secure Catalyst 3560 8- or 12-port switch on top of or under a desk or a shelf, or on a wall, use the mounting template and

three mounting screws:

1. Position the screw template on the mounting surface with the two side-by-side slots forward. Peel the adhesive strip off the

bottom, and attach the template.

2. Use a 0.144-inch (3.7 mm) or a #27 drill bit to drill a 1/2-inch (12.7 mm) hole in the template screw slot positions.

3. Insert the screws in the slots on the template, and tighten until they touch the template. Remove the template from the

mounting surface.

Number-8 Phillips pan-head screws

4. Place the switch onto the mounting screws, and slide it forward until it locks in place.

Mounting template