- ページ 10

ネットワーク・ルーター Digisol DG-LB1054UVのPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Digisol DG-LB1054UV 12 ページ。 Load balancing router with 2xfe wan, 1x3g/4g enabled usb, 3xfe lan

ページを印刷する

Press OK.



Type ipconfig to get the IP of default gateway.



Type "ping 192.168.123.254". Assure that you ping the correct IP



Address assigned to the load balancing Router. It will show four

replies if you ping correctly.



Ensure that your Ethernet Adapter is working, and that all network

drivers are installed properly. Network adapter names will vary

depending on your specific adapter. The installation steps listed

below are applicable for all network adapters.

Go to Start > Right click on "My Computer" > Properties.



Select the Hardware Tab.



Click Device Manager.



Double-click on "Network Adapters".



Right-click on Wired Card bus Adapter or your specific network



adapter.

Select Properties to ensure that all drivers are installed properly.



Look under Device Status to see if the device is working properly.



Click "OK".

