- ページ 13

無線アクセスポイント Digisol DG-WA1000NのPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Digisol DG-WA1000N 13 ページ。

Step 3: Enter the network security key if the wireless network you wish to connect has wireless

encryption enabled. Click Connect. The connection should now get established.

6. FAQ

Following are the solutions to problems that may occur during the installation and operation

of the DIGISOL DG-WA1000N Wireless LAN Access Point.

Can't get connected to wireless Access Point.



If encryption is enabled, please re-check WEP or WPA pass-phrase settings on your

wireless client.



Try to move closer to wireless Access Point.



Unplug the power plug of Access Point, and plug it back again after 10 seconds.



If all LEDs on Access Point are OFF, please check the status of A/C power adapter,

and ensure it's correctly powered.

Wireless client cannot locate the Access Point.



Verify whether the 'Broadcast ESSID' is set to OFF on Access Point.



Verify whether the antenna is properly installed.



If you are away from your Access Point then try to get wireless client closer to AP.



Ensure that you input ESSID on your wireless client manually, if ESSID broadcast is

disabled.

This product comes with Life time warranty. For further details about warranty policy and

Product Registration, please visit support section of

DIGISOL DG-WA1000N Wireless LAN Access Point Quick Installation Guide