- ページ 9

セキュリティセンサー FIBARO FGDW-002-7のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。FIBARO FGDW-002-7 16 ページ。 Door/window sensor

#6: Association

Association (linking devices) - direct control of other devices within

the Z-Wave system network e.g. Dimmer, Relay Switch, Roller Shutter

or scene (may be controlled only through a Z-Wave controller).

The Door/Window Sensor 2 provides the association of three

groups:

1st Association Group – "Lifeline" reports the device status and al-

lows for assigning single device only (main controller by default).

2nd Association Group – "On/Off" is assigned to the device status -

contact sensor (sends Basic Set command frames).

3rd Association Group – "Tamper" is assigned to the TMP switch

(sends alarm command frames).

The Door/Window Sensor 2 in 2nd and 3rd group allows to control

5 devices (regular or multichannel) per an association group.

"LifeLine" group is reserved solely for the controller and hence only 1

node can be assigned.

To add an association (using the Home Center controller):

1. Go to device options by clicking the icon:

2. Select the „Advanced" tab.

3. Specify to which group and what devices are to be associated.

4. Save the changes.

5. Wake up the device manually or wait for the next automatic wake

up.

NOTE

Association

allows

transfer

control

commands between

devices without par-

ticipation of the main

controller.

Direct range between

devices

recom-

mended.

NOTE

"Lifeline"

supported

Z-Wave

Command

Classes: notification,

Battery, Sensor Mul-

tilevel, Device Reset

Locally.

ASSOCIATIOn