- ページ 6

セキュリティセンサー FIBARO FGMS-001のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。FIBARO FGMS-001 20 ページ。 Motion sensor
FIBARO FGMS-001 にも：取扱説明書 (2 ページ), 取扱説明書 (11 ページ)

NOTE

Remember to add the

device to the Z-Wave

network prior to in-

stallation, as the add-

ing procedure must

be performed within

the direct range of the

controller.

PhySICAL InSTALLATIOn

#4: Physical installation

Detection range:

Detection range of the Motion Sensor is shown below. Actual range

of the Sensor can be influenced by environmental conditions.

3 m

0 m

Installation location and working conditions:

The Motion Sensor should be installed in a corner of the room or per-

pendicularly to the doors.

Moving objects such as trees blowing in the wind, cars passing by,

windmills and moving masses of air and heat within detection area

of the sensor can cause false motion detection.

Installing the Motion Sensor:

1. Install the holder (using an expansion bolt or a sticker).

2. Insert the device into the holder.

3. Test the operation - check whether the device indicates motion

detection.

5 m

0 m

7 m

5 m

7 m

Sticker