- ページ 2

会議システム Crestron UC-FCMX-TのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Crestron UC-FCMX-T 9 ページ。 Crestron flex r-series mobile uc systems

UC-FCMX Series

Crestron Flex R-Series Mobile UC Systems

Assemble Mounting Components

In R-Series mobile UC systems, some component mounting is required. A

device mounting shelf for the included Crestron Mercury device is

premounted to the front of the cart. A UC bracket assembly, PoE switch,

power supply, power strip, retractable power cable, and retractable

Ethernet cable are premounted to the cart's interior for convenience.

Attach the Display Mounting Bracket Arms

Prior to mounting the display (not included) to the cart, the display

mounting bracket arms must be attached to the display.

To attach the display mounting bracket arms:

1. Set the display on a flat surface with the screen side down. Ensure

that the surface is protected so that the screen is not damaged.

2. Align the mounting holes on the left and right edges of the display

mounting bracket arms over the mounting holes on the rear of the

display.

3. Follow the display manufacturer's instructions to attach the display

to the display mounting bracket arms using the supplied screws and

washers.

NOTE:

Screw placement may differ from the following image

based on the location of the display's mounting holes.

Quick Start