- ページ 7
会議システム Crestron UC-MX70-NC-ZのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Crestron UC-MX70-NC-Z 9 ページ。 Flex advanced tabletop large room conference system for zoom rooms software
ページを印刷する
UC-MX70-NC-Z
Crestron Flex Advanced Tabletop Large Room Conference System for Zoom Rooms® Software
Configure
Apply Power
Press the power button on the bottom of the UC Engine and apply
power to all of the other devices in the system.
Configure the Conference Device
To configure the conference device to operate in Zoom Rooms Video
mode:
1. On a computer, enter the IP address displayed on the conference
device into a web browser.
NOTES:
The device and computer must be on the same network switch
l
and VLAN.
A login with administrative rights for the device is required.
l
2. Enter the following information in the appropriate fields:
UC-Engine Address: Enter the IP address or hostname of the UC
l
Engine.
NOTE: The hostname is printed on a label affixed to the UC
Engine.
UC-Engine Port: By default, port number 49500 is used. If a
l
different port number has been configured on the UC Engine,
enter that port number instead.
UC-Engine Admin Username: Enter the username for the UC
l
Engine. The default username is "admin".
UC-Engine Admin Password: Enter the login password for the UC
l
Engine. The default password is "crestron".
3. Select Save Changes.
Quick Start
7