ラック&スタンド Crestron C2N-CAMIDSPTのPDF データシートをオンラインで閲覧またはダウンロードできます。Crestron C2N-CAMIDSPT 2 ページ。 Ceiling mount for c2n-camidspt:
Crestron C2N-CAMIDSPT にも: 仕様書 (6 ページ)
Ceiling Mount for C2N-CAMIDSPT: C2N-CAMI-CMT
Description
The C2N-CAMI-CMT is a black ceiling mount accessory for the Crestron
Camera Interface, Digital Servo Pan Tilt Head. The Ceiling Mount easily attaches to any secure
horizontal surface, and provides sufficient clearance for most of today's camera/lens assemblies.
The Ceiling Mount is constructed of steel, has an overall length of 8.0 inches (20.32 cm), and a
maximum load rating of 40 pounds (88 kg).
Installation consists of attaching the Ceiling Mount (ceiling mounting hardware not supplied) to a
suitable location that will support the combined weight of the Ceiling Mount, the C2N-CAMIDSPT,
and the camera/lens assembly; attaching the C2N-CAMIDSPT to the Ceiling Mount, using four
1/4x20x1/2 inch screws supplied; and then mounting the camera/lens assembly. (Refer to the
illustration below.)
Further Inquiries
If after reviewing this sheet, you cannot locate specific information or have questions, please take
advantage of Crestron's award winning customer service team by calling:
You can also log onto the online help section of the Crestron website (www.crestron.com) to ask
questions about Crestron products. First-time users will need to establish a user account to fully
benefit from all available features.
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
3.5 in (8.89 cm)
Diameter
C2N-CAMIDSPT
MOUNT
Four Thru Holes
0.265 in (0.67 cm)
•
In the US and Canada, call Crestron's corporate headquarters at
1-888-CRESTRON [1-888-273-7876].
•
In Europe, call Crestron International at +32-15-50-99-50.
•
In Asia, call Crestron Asia at +852-2341-2016.
•
In Latin America, call Crestron Latin America at +5255-5093-2160.
•
In Australia and New Zealand, call Crestron Pacific at +613-9480-2999.
5.0 in (12.70 cm)
8.0 in
(20.32 cm)
CEILING
Ceiling Mount for C2N-CAMIDSPT: C2N-CAMI-CMT
Specifications subject to change without notice.
®
C2N-CAMIDSPT
Diameter
MOUNT
Four Thru Holes
0.265 in (0.67 cm)
on 4.0 in (10.16 cm)
Bolt Hole Circle
Data Sheet – DOC. 6274
07.04
www.crestron.com