- ページ 9
液晶テレビ Sharp AQUOS LC-15B8UのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp AQUOS LC-15B8U 39 ページ。 Sharp lcd color television operation manual lc-15b8u-s
ページを印刷する
Preparation (Continued)
CABLE TV (CATV) CONNECTION
• A 75-ohm coaxial cable connector is built into the LCD TV set for easy hookup. When connecting the 75-ohm
coaxial cable to the LCD TV set, screw the 75-ohm cable to the ANT. terminal.
• Some cable TV companies offer "premium pay channels". Since the signals of these premium pay channels are
scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3
or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.) For more specific
instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/
descrambler provided by your cable TV company is explained below.
Please note: An RF switch provided with two inputs (A and B) is required (not supplied).
"A" position on the RF switch (not supplied): You can view all unscrambled channels by using the TV's channel keys.
"B" position on the RF switch (not supplied): You can view the scrambled channels via the converter/descrambler by
A
• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.
Plug the AC cord
into the main unit,
and then put it
through the cable
holder.
A
• Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet.
• Unplug the AC cord from the LCD TV set and wall outlet when LCD TV set is not to be used for a long period of time.
8
Antenna Connection (Continued)
using the converter's channel keys.
RF switch (not supplied)
OUT
Cable TV converter/
descrambler
(not supplied)
Power Connection
AC INPUT terminal
(AC 110-240 V)
Wall outlet
Two-set
signal
splitter
(not
supplied)
IN
POWER
AC cord
Cable TV line